P1 · Application / Skincare

Camellia Seed Oil for Skincare Formulations

Camellia seed oil is a high-oleic base oil pressed from Camellia oleifera. We supply it to formulators as a raw material in two grades — cold pressed (unrefined) and fully refined — each with a full test report you can verify online. This page covers the unrefined grade and the specifications that matter in a leave-on formula.

Request a Quote
Camellia oil storage tanks at the JINBO plant
01

What camellia seed oil is

Camellia oleifera is the species grown across southern China for its seed oil. The oil is mechanically pressed at or below 60 °C and, in the unrefined grade, filtered but not refined — so it keeps its natural colour and its tocopherols. It is not an essential oil, not a fragrance, and not the same material as tea tree oil.

02

Camellia oleifera and tsubaki oil

Japanese tsubaki oil comes from Camellia japonica, a different species. Both are high-oleic and both are used in hair and skin care, but they carry different INCI names and cannot be substituted on a label without reformulating. We supply the oleifera species only.

03

Specifications that matter in a leave-on formula

Three values decide whether a base oil suits leave-on use. Acid value 0.94 mg KOH/g means free fatty acid content is low — the fraction most associated with irritation. Peroxide value 0.013 g/100 g means the oil is fresh. Solvent residue fell below the 2 mg/kg detection limit: this oil is pressed, never extracted.

04

Contaminants

Five contaminants were tested and all five came back below their limits of detection. Each limit is stated in the table, because "not detected" on its own tells you nothing — a detection limit of 2 mg/kg and one of 0.02 mg/kg are not the same claim.

ParameterResultLimit of detectionLimit
Lead (Pb)Not detected0.02 mg/kg≤ 0.08 mg/kg
Total arsenic (As)Not detected0.003 mg/kg≤ 0.1 mg/kg
Aflatoxin B₁Not detected0.03 µg/kg≤ 10 µg/kg
Benzo[a]pyreneNot detected0.2 µg/kg≤ 10 µg/kg
Solvent residueNot detected2 mg/kgNo limit set (pressed oil)

Every value above carries its limit of detection, because "not detected" on its own says nothing. Report No. A2240440191101001C, verifiable at mycti.cti-cert.com with code SEF9.

05

What we are, and what we do not claim

We are a camellia oil mill, not a cosmetics manufacturer. Our trademark covers Class 29 (food) only, so we make no cosmetic claims and do not describe the oil as cosmetic grade — that designation implies certifications we do not hold. What we supply is a consistent, tested base oil — unrefined or refined, both from the same batch — with documentation your regulatory review can rely on.

06

Supply

Minimum order is 5 MT for bulk oil. Bulk formats are 190 kg steel or HDPE drums, 20 L pails and 1000 L IBC totes; other formats on request. Samples are free — 100 ml for evaluation, you cover the freight, credited against your first order. Loading from Shenzhen Shekou, Shanghai or Guangzhou.

07

FAQ

Six questions come up in almost every skincare enquiry: the difference from tea tree oil, whether we call it cosmetic grade, acid value, certificates, sample quantities and whether the oil is refined. Short answers follow. If yours is not covered, send it and we will answer in writing.

Is camellia oil the same as tea tree oil?

No, and the difference matters. Tea tree oil is distilled from Melaleuca alternifolia leaves and is for external use only. Camellia seed oil is pressed from Camellia oleifera seeds and is an edible oil. They share two words in English and nothing else.

Is this cosmetic grade?

We do not use that term. It implies specific certifications we do not hold. What we supply is a cold pressed base oil with a full third-party test report, including limits of detection for every contaminant — which is what your own assessment needs.

What is the acid value and why does it matter?

0.94 mg KOH/g. It measures free fatty acids, the fraction most associated with irritation in a leave-on product. Lower is generally better for facial formulations.

Do you provide a COA?

Yes, batch-specific, issued with each shipment. The third-party report is also verifiable online by number.

Can you supply smaller quantities for testing?

Samples are free — 100 ml for evaluation, you cover the freight, credited against your first order. The commercial minimum is 5 MT for bulk oil.

Is the oil refined or bleached?

The cold pressed grade is neither refined nor bleached — it keeps its colour and tocopherols. We also refine part of the same batch for formulators who need low colour and a higher smoke point; that grade is degummed, neutralised, bleached and deodorised.